Hartford Chapter

Home Page

Up
Chapter Information
The Macrogram
Meetings
Employment
Sustaining Members
Students
PE Registration
Site Search
Sponsor
Other Sites
Webmaster's Corner
Chapter Archives

Sustaining members are a critical part of the success of ASM-Hartford. They provide both a continued core presence at Chapter activities, and an increased level of financial support. In return, they enjoy the goodwill and camaraderie, and the satisfaction of helping to educate young materials scientists. Their companies will receive the following publicity at no additional charge:

• Listing on ASM-Hartford's web site, including company ad (above and on Home Page),
  and a link to the company's web site (see below)
• A listing of the company in the Macrogram
• Recognition at the Sustaining Members' Technical Meeting in June and awards for membership anniversaries
• Special recognition in the Roster
• Special $150 rate for placing an advertisement in the Macrogram ($200 for regular members, $300 for non-members)
• Opportunity to give a Coffee Talk at an ASM Hartford Meeting.

What every company executive should know about the value of technical societies
More Chapter Sustaining Membership information from ASM International

The cost of a Sustaining Membership, at $175, is only $75 more than that of a regular membership, and it does include one regular membership! If you can get your company to pick up the tab, then your out-of-pocket expenses will actually go down. To find out more about becoming a Chapter Sustaining Member, request information or contact your Chapter Chairperson.

ASM International Hartford Chapter would like to thank the following Sustaining Members for their support:

45 Connecticut Ave. So. Windsor Connecticut 06074 Tel: (860) 282-1371 Fax: (860) 282-9020 Email: Al Hutwagner, General Manager Austenitizing, solutioning, stress relieving, hardening, annealing, bright tempering, aging/precipitation hardening of stainless steels, titanium, aluminum, cobalt alloys, nickel alloys. Vacuum brazing; silver, nickel, gold, aluminum/titanium, copper. Metallurgical lab on premises. ISO 9002, FAA Repair station H5MR005N	Bodycote Lindberg Corporation Berlin Division 675 Christian Lane Berlin, CT 06037 USA Tel: 860-225-7691 Fax: 860-229-3891 Email : Mr. Al Hutwagner, General Manager Product Description: Heat Treating, Metal Joining, Special Processess, Metallurgical and Non-Destructive Testing Services.
265 Field Road, Somers, CT 06071, USA Phone:  860-749-0761 Fax:  860-763-3557 E-Mail: sales conval.com Website: www.conval.com Product line includes: "T" and angle pattern bodies; a 3500 lb. and a 4,500 lb. series; 2 1/2, 3 and 4 inch sizes; bellows seal valves; 3-way valves; gate valves; a variety of material options; cryogenic valves; multiple orifice blowdown valves, and an actuator specifically designed for its valves. Currently, Conval is developing an in-line repairable, metal seated ball valve, and an instrument valve.	838 Cherry Street Blanchester, Ohio 45107 Phone: (860) 978-5285 Fax: (937) 783-2539 E-mail: paul vegiard A global supplier of molten metal temperature measurement products, Consolidated also specializes in materials for high temperature applications Proven experience in materials and process control for non-ferrous metals temperature measurement and calibration fluxing / degassing and casting components pre-fired ceramic and refractory shapes materials for high temperature applications thermal surveys and analysis
Deringer-Ney Inc. Ney Industrial Park Bloomfield, CT 06002 USA Phone: (860) 242-2281 Toll Free: (888) JMNEY4U Fax: (860) 242-5688 Contact: Garth W. Boyd, VP Marketing 860-286-6108 phone gboyd@deringerney.com Product Description: Deringer- Ney Inc. is a manufacturer of ultra-small, precision metal and plastic components and electrical contacts.	Engelhard Corporation 12 Thompson Road East Windsor, CT 06088 Telephone: 860-623-9901 Fax: 860-623-4657 Engelhard Corporation is a surface and materials science company that develops technologies to improve customers’ products and processes. A Fortune 500 company, Engelhard is a world-leading provider of technologies for environmental, process, appearance and performance applications. Engelhard provides the following capabilities:  Thermal spray  HVOF  Peening  Coating removal  Heat treat  Laboratory evaluation
Brian Wright, President Bruce Wright, CNY Manager Jim Ahren, Sale Manager Bob Wright, Service Manager www.brookanco.com Corporate Office 3495 Winton Place, Building B Rochester, NY 14623 T- 585-475-9570 • F- 585-475-1942 Mid-West Offices 626 County Street Milan, MI  48160 T- 734-439-0426 • F- 585-475-1942 South-Western Offices 7462 Dogwood Park Fort Worth, TX  76118 T- 817-590-9313 • F- 585-475-1942	Fenn Manufacturing Company 300 Fenn Road Newington, CT 06111-2212 USA Tel: 860-594-4300 Fax: 860-667-4667 Email: mcdiv.fennmfg.com Product Description: Metal Forming Machinery: Rolling Mills, Wire Flattening, Drawing & Shaping Mills, Swaging Machines, Hydroformers, Tube End Formers, Impact Cut-Off Machines, Turks Heads, Draw Benches, Accessories; Builders Of Machinery; Contract Machining Of Precision Parts & Assemblies.
Flame Treating & Engineering Co. 702 Oakwood Ave. West Hartford, CT 06110 USA Tel: 860-953-3519 Fax: 860-953-1723 Email: FTECO Product Description: Flame & Induction Heating, Capacity To 10 Tons. Metallurgical Laboratory, Magna Flux Inspection, Automatic Feeds. Complete Tool & Fixture Capability. Participate In The ISO 9000 Quality Standards.	Grot Enterprises Grot Enterprises works with people and help them set up successful businesses, providing a unique Web-based business opportunity for entrepreneurs, using the power of the Internet. Ride the Wave
22 E Dudley Town Rd Bloomfield, CT 06002-1410 Tel: 860-243-1441 Product Description: Jacobs Vehicle Systems Manufactures supplemental retarding products for diesel engine powered vehicles. Current products include Jacobs Engine Brakes and Jacobs ExhaustBrakes for Caterpillar, Cummins, DAF, Detroit Diesel, Hino, Mack, Mitsubishi, and Navistar engines. Other products include several models of Jacobs Driveline Brakes	Put your Company here!
Metallurgical Services International Phone/Fax: 860-567-2040 Cell Phone: 860-480-2734 E-Mail: kcorbo Consulting Services New and Existing Product and Process Development Failure Analysis and Problem Solving Strategic Sourcing Metallurgical and metals processing training and education	M & S Welding & Fabrication Co 5 M And S Ct, New Britain, CT 06051 Tel: (860) 225-4609 Fax: (860)827-0249
NERAC, Inc. Contact NERAC or contact Wayne Simpson at info nerac.com NERAC, the world's premier information gathering, solution-oriented resource. We've been helping companies just like yours locate highly relevant information and solve problems for over 30 years. Our proven track record and commitment to excellence make us the leader in our chosen field of information retrieval. One Technology Drive Tolland, CT 06084 Phone (860) 872-7000, FAX (860) 875-1749	Put your Company here!
Pratt & Whitney is a pioneer in flight and in technology, a company steeped in history yet focused on the future. Since 1925, Pratt & Whitney's engines have broken the barriers of time, the distances between people and places. Today, its purpose and driving spirit remain unchanged: to provide unprecedented power that ignites the imagination and moves the world.	Specialty Steel Treating, Inc. Kripes Rd. & Hwy. 20 East Granby, CT 06026 USA Tel: 860-653-0061 Fax: 860-653-0068 Services Description: If you need heat treating, chances are we can help you. We primarily service the Aerospace, Automotive, Truck, and Tool & Die Industries, but do not stop there. We are approved by All Domestic Aircraft Prime Contractors, maintaining very stringent approvals. For example, SST Fraser is the only Commercial Heat Treat Facility in the Country approved to carburize Class 'A' Flight Safety and Flight Critical Components for Bell Helicopter.
United Service Co. P.O. Box 310136 Newington, CT 06011-0136 Tel: 860-667-4403 1-800-437-3013 Fax: 860-665-1142 Email: info unite dservice Product Description: Since 1975, United Service Company has been servicing and supplying high quality hardness testing equipment and accessories to the manufacturing industry throughout the Northeast. We are a ISO/IEC 17025 company and all our service, calibration, certification work is performed to ASTM and NIST where applicable.  We would value the opportunity to be of service to you.	Email: Leon Shaw Chemical Engineering and Materials Science & Engineering are merging to form a new Department of Chemical, Materials & Biomolecular Engineering. The Institute of Materials Science (IMS) ASM /TMS Student Chapter Department of Metallurgy and Materials Engineering has 10 faculty members who have diverse interests and expertise in the areas including, but not limited to: ceramics, metals composites, coatings, thin films, active materials, processing, synthesis, mechanical behavior, thermal properties, electrical properties, materials characterization, nanostructured materials, fuel cells, surface science, solid freeform fabrication, materials theory, biomaterials… Incepted in 1967 as a graduate Department, we offer undergraduate materials courses to other departments, and we run a successful double-major B.S. program. In 2000, we launched our own undergraduate Materials Engineering B.S. major, with our first B.S. class set to graduate in 2004.
Vitta Corp. 7 Trowbridge Dr. Bethel, CT 06801 USA Tel: 203-790-8155 Fax: 203-778-6478 Email: infovitta.com Product Description: Manufacturer of nickel based high temperature brazing alloys and coating materials available as powders, pastes, tapes, and foils. Also manufacture stop-offs, and cements for brazing, solder glass transfer tapes, and metallizing tapes.